DUTKD2.5TS Terminal Blocks Screw Connection Knife Disconnect Terminal Blocks Manufacturer and Supplier in India – Elmex

DUTKD2.5TS

Approvals

Line Diagram

General Data

Type	DUTKD2.5TS
Wire termination Technology	Screw Connection
Rating	1000 V / 24 A / 2.5 sq.mm / 0.4 Nm
GTIN / Harmonize Custom Code	85389000
Standard Packing Qty (in No)	100
Country of Origin	India

Data Specification
Downloads

Thickness (mm)	5
Thickness (inches)	0.2
Width (mm)	62
Width (inches)	2.44
Height (mm)	53.5
Height (inches)	2.11
Weight For Standard Packing Qty (KG)	1.2

Housing	Polyamide 6,6
Clamping Material	CRCA
Standard Colour	Gray
Other Colour Variants	Red, Yellow, Blue, Black, Green, Khakhi

Stranded Wire - Min (sq.mm)	0.5
Stranded Wire - Max (sq.mm)	2.5
Solid Wire - Max (sq.mm)	4

Standard	IEC 60947-7-1
Rated Voltage (V)	1000
Rated Current (A)	24
Rated Cross Section (sq.mm)	2.5
Short Time Withstand Current (kA)	0.3
Rated Impulse Withstand Voltage (kV)	8
Pollution Degree	3

Cover Profile

PCK3

Cover Profile , Type -PCK3
Height : 28 mm
Width : 58.35 mm
Thickness : 1 mm

Cover Profile Carrier

UHDD

Cover profile carrier , Type - UHDD
Height : 74.5 mm
Thickness : 2 mm
Length : 55.82 mm

DIN Rail Perforated

CHS

32 mm DIN Rail with Standard lengths 300 mm , 500 mm , 1000 mm - Unperforated
Height : 15 mm
Width : 32 mm
Thickness : 1.5 mm

CHKDS

35 mm DIN Rail with Standard lengths 300 mm , 500 mm , 1000 mm - Perforated
Height : 15 mm
Width : 35 mm
Thickness : 1.5 mm
Length : 2000 mm

CHKS

35 mm DIN Rail with Standard lengths 300 mm , 500 mm , 1000 mm - Perforated
Height : 7.5 mm
Width : 35 mm
Thickness : 1 mm

DIN Rail, Unperforated

CHKD

35 mm DIN Rail with Standard lengths 300 mm , 500 mm , 1000 mm , Unperforated
Height : 15 mm
Width : 35 mm
Thickness : 1.5 mm

CHK

35 mm DIN Rail with Standard lengths 300 mm , 500 mm , 1000 mm , Unperforated
Height : 7.5 mm
Width : 35 mm
Thickness : 1 mm

End Cap

CHKENDCAP

END COVER/ CAP FOR CHK CHANNEL
Height : 14 mm
Width : 9 mm
Length : 41.5 mm

End Clamp

SCUP

TS32 , TS35 din rail mounted end clamp with fixing screws , Type - SCUP
Height : 34 mm
Length : 44.75 mm

SCEC35

TS35 DIN rail mounted End clamp with fixing nut and screw of size M3, Width - 8 mm, Color - Grey
Height : 31.5 mm
Width : 8 mm
Length : 45.8 mm

SCUSL

Universal rail mounted end clamp with fixing screws , Type - SCUSL
Height : 41.1 mm
Width : 8 mm
Length : 47.5 mm

SCUDD

TS35 , TS32 DIN rail mounted end clamp with fixing screws , Width - 10 mm , Type - SCUDD
Height : 50 mm
Width : 10 mm
Length : 55.6 mm

DCKN

TS35 din rail mounted end clamp without fixing screws , Width - 6 mm , Color - Grey
Height : 33 mm
Width : 6 mm
Length : 43.5 mm

DCKN10

TS35 DIN rail mounted end clamp without fixing screws , Width- 10 mm , Color - Grey
Height : 35 mm
Width : 10 mm
Length : 43.5 mm

SCKN

TS35 DIN rail mounted end clamp with fixing screws , Width - 8 mm , Color - Grey
Height : 34.5 mm
Width : 8 mm
Length : 44.9 mm

SCUN

TS35 , TS32 DIN rail mounted end clamp with fixing screws , Width- 9.5 mm , Color - Grey
Height : 35.5 mm
Width : 9.5 mm
Length : 50.6 mm

End Cover

DUTKD4EP

DUTKD4EP End cover for Terminal type DUTKD4 and DUTKD2.5.
Height : 38.2 mm
Width : 1.5 mm
Length : 62 mm

Marker For Terminal Blocks

LABEL KN5

Snap on type PVC marking Label , Type - KN 5
Width : 5 mm

Partition Plate

KBZF

END PLATE
Height : 65 mm
Width : 1.5 mm
Length : 65 mm

Plug-in Bridge/Jumper

SLPU5-2W

Plug In Bridge, Type – SLPU5-2W
Height : 26 mm
Width : 9.15 mm
Pitch : 5 mm

SLPU5-3W

Plug In Bridge, Type – SLPU5-3W
Height : 26 mm
Width : 14.15 mm
Pitch : 5 mm

SLPU5-10W

Plug In Bridge, Type – SLPU5-10W
Height : 26 mm
Width : 49.15 mm
Pitch : 5 mm

SLPU5-4W

Plug In Bridge, Type – SLPU5-4W
Height : 26 mm
Width : 19.15 mm
Pitch : 5 mm

SLPU5-5W

Plug In Bridge, Type – SLPU5-5W
Height : 26 mm
Width : 24.15 mm
Pitch : 5 mm

SLPU5-6W

Plug In Bridge, Type – SLPU5-6W
Height : 26 mm
Width : 29.15 mm
Pitch : 5 mm

SLPU5-7W

Plug In Bridge, Type – SLPU5-7W
Height : 26 mm
Width : 34.15 mm
Pitch : 5 mm

Marker carriers

GMH10

Group Marking Holder with 10 mm pitch
Height : 51 mm
Width : 10 mm
Length : 41.5 mm

GMH 20

Group Marking Holder with 20 mm pitch
Height : 51 mm
Width : 20 mm
Length : 41.5 mm

Complete Specification	View Download
Accessories	View Download
Technical	View Download
3D Model (.pdf)	View Download
3D Model (.stp)	Download

Enquire Now